Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Overview: Assisted Listening devices can improve hearing for anyone with hearing loss. The way it works is by having an a receiver delivering send the audio content directly to their ear. The device used in Thompson Hall W101 is called Assistive Listening Intelligent 12-Unit Charging Tray/Carrying Case and Earpiece.

Step-by-

...

Step Guide to set up the Assistive Listening Intelligent 12-Unit Charging Tray/Carrying Case

...

  1. Attach cable management base to charging tray.

    The charging tray is lying on its right side. A hand is using a screw driver on the bottom of the base.
  2. Attach cable management arm.

    The cable management arm is being placed on top of the tray.
  3. Face the arm inward or outward.

    Examples of the arm pointing inward and outward.
  4. Arm can be mounted on a flat surface life a counter, desk, or table.

    Mounting kit with the tray and four screws next to it.
  5. Connect the power cord to the charging unit and connect to the power source.

    A hand plugging in the charging unit to the power source.
  6. Connect the power supply. Charging status is shown by a flashing LED light.

    Examples of a person plugging in the charging tray.

...

  1. Press the POWER Button for a few seconds. The ID number will show up on the display.

    A hand is pressing the power button at the top of the device.
  2. Check-in the unit using the log book or software, or return the guests ID.

    A check list with the Check In box checked.
  3. Use disinfecting cleaning wipes to clean the earphone and unit.

    A person using a wipe to clean the earphone.
  4. Place the unit in a charging slot.

    A unit is being put back in its charging slot.
  5. Unit turns off by itself and begins charging. LED Status: Flashing - Charging, Solid - Fully Charged

    The units LED lights flash while charging and are solid when fully charged.

...