Versions Compared

Version Old Version 1 New Version 2
Changes made by

Daniel LaGrow

Daniel LaGrow

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Attach cable management base to charging tray.

    The charging tray is lying on its right side. A hand is using a screw driver on the bottom of the base.Image Modified

  2. Attach cable management arm.

    The cable management arm is being placed on top of the tray.Image Modified

  3. Face the arm inward or outward.

    Examples of the arm pointing inward and outward.Image Modified

  4. Arm can be mounted on a flat surface life a counter, desk, or table.

    Mounting kit with the tray and four screws next to it.Image Modified

  5. Connect the power cord to the charging unit and connect to the power source.

    A hand plugging in the charging unit to the power source.Image Modified

  6. Connect the power supply. Charging status is shown by a flashing LED light.

    Examples of a person plugging in the charging tray.Image Modified

Step-by-Step Guide to Checking Out Units

  1. Remove a unit from the charging slot.

    A unit has been picked up out of its slot.Image Modified

  2. The unit will turn on by itself, the ID is displayed.

    The unit ID of 777 is shown on the unit display.Image Modified

  3. Confirm that the battery is charged.

    The display now shows 100 percent. This indicates that it is fully charged.Image Modified

  4. Place the guest’s ID in the receiver slot of the tray/box.

    An equipment log showing the devices date of use, unit, name, and other info.Image Modified

Step-by-Step Guide to Checking In Units

  1. Press the POWER Button for a few seconds. The ID number will show up on the display.

    A hand is pressing the power button at the top of the device.Image Modified

  2. Check-in the unit using the log book or software, or return the guests ID.

    A check list with the Check In box checked.Image Modified

  3. Use disinfecting wipes to clean the earphone and unit.

    A person using a wipe to clean the earphone.Image Modified

  4. Place the unit in a charging slot.

    A unit is being put back in its charging slot.Image Modified

  5. Unit turns off by itself and begins charging. LED Status: Flashing - Charging, Solid - Fully Charged

    The units LED lights flash while charging and are solid when fully charged.Image Modified

Step-by-Step Guide to Setting Up Units

...