- Open Settings
- Select Wi-Fi and switch it to On
- Select eduroam from the list of available SSIDs
- Your device may not require all the steps below
- Connect to: eduroam
- EAP method: PEAP
- EAP Phase 2 Authentication: MSCHAPV2
- Server CA Certificate: Use system certificates
- Online Certificate Status: Don't validate
- Domain: fredonia.edu
- Identity: e-services name in the following format
If you are affiliated with Fredonia use: eservicesID@fredonia.edu
If you are from another campus that participates in eduroam use : campusid@campusdomain.edu (example exampleuser@flcc.edu)
- Anonymous Identity: Leave blank
- Wireless Password: e-services password (If you don't see the Password field, scroll down on the form until you can see it and select it)
- When you're done entering your information, press Connect
5. If you have successfully entered your username and password, you should get a message saying you are connected to eduroam
Also, the Wi-Fi symbol should now be shown at the top of the screen
Support:
If you have any questions or need further assistance, please contact the ITS Service Center that can be contacted through email at ITSservicecenter@fredonia.edu, Tracker, phone, or by a visit to the ITS Service Center office. The office is located at W203 Thompson, on the 2nd Floor. Phone: (716) 673-3407.
Related articles