Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

  1. Manually Setup your Wired Network for Windows 7/8

    Please contact the ResNet Office at anytime if you feel that you need help with any of this.

    Please find a PDF of these directions here.

    1. Press the "windows key", type "services.msc" in the text area and press "enter." (picture will look different for windows 7)


    2. Scroll down until you see "Wired AutoConfig", RIGHT click on it and select "Properties"


    3. Set the "Startup Type" to "Automatic"


    4. Click on the "Start" and then "OK"


    5. Press the "windows key" and type in "View Network Connections" and press "Enter" (picture will look different for windows 7)


    6. Right click on "Ethernet" (for Windows 8) or "Local Area Connection" (for Windows 7)


    7. Click on "Properties", then click the "Authentication" tab at the top of the resulting window.
    8. Check "Enable IEEE 802.1x authentication" and select "Microsoft: Protected EAP (PEAP)" from the drop down box


    9. Click on "Settings"


    10. Uncheck "Verify the server's identity" and select "Secured password (EAP-MSCHAP v2) from drop down


    11. Click Configure
    12. Uncheck "Automatically use my Windows logon name and password" and click "OK


    13. Click "OK" again
    14. Click "Additional Settings"


    15. Check "specify authentication mode" and Select "User authentication" from the drop down. Then click "OK"


    16. Click on "OK"


    17. For Windows 7, you should see a bubble appear. Click on it. For windows 8, skip this step.


    18. You should now be prompted with a "Network Authentication" window. Enter your Fredonia e-Services ID and password and click "OK"


    19. After a few seconds, your internet connection should work! CONGRATULATIONS!


Filter by label

There are no items with the selected labels at this time.

  • No labels