Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

  1. Open Settings



  2. Select Wi-Fi and switch it to On



  3. Select eduroam from the list of available SSIDs

    A typical view of what the screen would look like if you were joining a wireless network on an Android device



  4. Your device may not require all the steps below

  • Connect to: eduroam

  • EAP method: PEAP

  • EAP Phase 2 Authentication: MSCHAPV2

  • Server CA Certificate: Use system certificates

  • Online Certificate Status: Don't validate

  • Domain: fredonia.edu

  • Identity: e-services name in the following format

If you are affiliated with Fredonia use:  eservicesID@fredonia.edu

If you are from another campus that participates in eduroam use: campusid@campusdomain.edu    (example exampleuser@flcc.edu)

  • Anonymous Identity: Leave blank

  • Wireless Password: e-services password (If you don't see the Password field, scroll down on the form until you can see it and select it)

  • When you're done entering your information, press Connect

A typical view of what the screen would look like if you were configuring settings to connect to the eduroam network on an Android device


     5. If you have successfully entered your username and password, you should get a message saying you are connected to eduroam

 Also, the Wi-Fi symbol should now be shown at the top of the screen

A typical view of what the screen would look like if you successfully joined the eduroam network on an Android device


Support:

If you have questions or need further assistance, please email the ITS Service Center or submit a ticket through Tracker. Our phone number is (716) 673-3407, and you can visit us at our office in W203 Thompson Hall 2nd Floor.






  • No labels