Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

How do I use the LISTEN Technology equipment for anyone with assistive listening needs?

\uD83D\uDCD8 Instructions

Overview: Assisted Listening devices can improve hearing for anyone with hearing loss. The way it works is by having a receiver send the audio content directly to their ear. The device used in Thompson Hall W101 is called Assistive Listening Intelligent 12-Unit Charging Tray/Carrying Case and Earpiece.

Step-by-Step Guide to set up the Assistive Listening Intelligent 12-Unit Charging Tray/Carrying Case

Examples of a charging tray and case. Each object has 12 devices inside them.

  1. Attach cable management base to charging tray.

    The charging tray is lying on its right side. A hand is using a screw driver on the bottom of the base.

  2. Attach cable management arm.

    The cable management arm is being placed on top of the tray.

  3. Face the arm inward or outward.

    Examples of the arm pointing inward and outward.

  4. Arm can be mounted on a flat surface life a counter, desk, or table.

    Mounting kit with the tray and four screws next to it.

  5. Connect the power cord to the charging unit and connect to the power source.

    A hand plugging in the charging unit to the power source.

  6. Connect the power supply. Charging status is shown by a flashing LED light.

    Examples of a person plugging in the charging tray.

Step-by-Step Guide to Checking Out Units

  1. Remove a unit from the charging slot.

    A unit has been picked up out of its slot.

  2. The unit will turn on by itself, the ID is displayed.

    The unit ID of 777 is shown on the unit display.

  3. Confirm that the battery is charged.

    The display now shows 100 percent. This indicates that it is fully charged.

  4. Place the guest’s ID in the receiver slot of the tray/box.

    An equipment log showing the devices date of use, unit, name, and other info.

Step-by-Step Guide to Checking In Units

  1. Press the POWER Button for a few seconds. The ID number will show up on the display.

    A hand is pressing the power button at the top of the device.

  2. Check-in the unit using the log book or software, or return the guests ID.

    A check list with the Check In box checked.

  3. Use cleaning wipes to clean the earphone and unit.

    A person using a wipe to clean the earphone.

  4. Place the unit in a charging slot.

    A unit is being put back in its charging slot.

  5. Unit turns off by itself and begins charging. LED Status: Flashing - Charging, Solid - Fully Charged

    The units LED lights flash while charging and are solid when fully charged.

Step-by-Step Guide to Setting Up Units

  1. Connect an earpiece to the 3.5mm output jack extension cable.

  2. Connect the other side of the output jack to the top of the device.

  3. Enjoy your class!

  • No labels