Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

How do I create a course containing library content and link the course to an instructor’s course?

Step-by-step guide

Create an Empty Course Shell

  1. After logging into OnCourse, locate the Search and Create Courses block.
  2. Click the Search and Create Courses link.
  3. Under the Course Categories heading, expand the Library Instruction menu item.
  4. Choose the semester the library course should be built in.

  5. Under the semester heading, click the “Create new course” link.

  6. Enter in the Course full name

    1. The naming convention for library instruction courses is: Library Instruction: Subject-Course-Section: Instructor’s Last Name.

      1. Example: Library Instruction: MATH-110-01: Melohusky

  7. Enter in the Course short name

    1. The naming convention for the course short name is: SubjectCourseSectionSemesterYearLI

      1. Example: MATH11001Spring17LI

  8. Check the Course category drop down menu to be sure the course is loading into the correct semester.
  9. Press the “Save and display” button at the bottom of the page.
  10. Once the course loads, locate the green gear icon on the upper right hand side of the page.  Click on the drop-down menu and select More.
    locate the green gear icon on the upper right hand side of the page. Click on the drop-down menu and select More



  11. Click on the Users tab and click on Enrolled Users.

    Click on the users tab and then click on enrolled users to manage users


  12. If you are not already enrolled in the course, press the Enroll Users button.
  13. Change the Assign roles menu to Instructor.
  14. Enter your last name in the Search field and press search.
  15. Press Enroll next to your name.
  16. Press “Finish enrolling users”

Allow Guest Entry and Self Enrollment

  1. From the Library Course page, locate the the green gear icon on the upper right hand side of the page.  Click on the drop-down menu and select More.

  2. Click on the Users tab. 

  3. Click the Enrollment Methods link.

    click on the Users tab and then select the Enrollment Methods link to manage enrollment methods


  4. Turn on Guest Access by clicking the eye in the Edit column.
    1. If the eye has a line through it, guest access is turned off
  5. Turn on Self enrollment by clicking the eye in the Edit column.
    1. Note: Self enrollment only needs to be turned on if the students will be completing a quiz or other submission type assignment.
  6. Return to the main course page.
  7. From the main course page, copy the url address of the course. This url address will be used in step #13 below.

Create a Library Block in the Instructor’s Course

  1. Return to your Dashboard by using the breadcrumb at the top of the page.
  2. Locate the Search and Create Courses block, and click the Search and Create Courses link.
  3. Scroll to the bottom of the page and locate the “Search courses” field.
  4. Enter in the semester code and course name.
    1. Semester codes are Fall 30, JTerm 05, Spring 10, Summer 20 and are put after the four digit year when searching.
    2. Example: A Spring 2017 MATH-110 course would use the search term 201710-MATH-110-01
    3. It is helpful if you also include the section number since the instructor’s name will not appear with the course listing.
  5. Click on the the name of the course and then press View.
  6. In the top right-hand corner locate the green gear icon. From the drop-down menu select Turn editing on.

    Click on the drop-down menu to the right of the gear icon and click on Turn editing on


  7. Locate the “Add a Block” block on the left hand menu and click on it.  A pop-out menu will appear. Scroll down and choose HTML.  

             After you click on Add a block, scroll down and select HTML to add an HTML block to the course


  8. A new block called HTML block will be created, press the gear button, called Actions if you hover over it.
  9. Choose Configure HTML Block.

    After you add an HTML block to your course, click on the gear icon and select Configure new HTML block to adjust block settings

  10. The block title is “Library Instruction Materials”
  11. In the Content field enter in “Click Here To Access Library Instruction Materials For (insert course name and section number here)"

  12. Highlight the text and press the hyperlink button in the content field of the HTML block, highlight the text and then click on the hyperlink button

  13. Paste in the course hyperlink copied from step #6 above into the Link URL field.

  14. Change the Target drop down menu to “Open in a new window"

  15. Press the Insert button.
  16. Press Save changes.


Hints:

  • Make sure you know the course name and section number before you start.

Short URL to this page: 

Filter by label

There are no items with the selected labels at this time.

  • No labels